Orelon logoOrelon
料金

Prompt-Based AI Video Generation: A Practical Workflow Guide

2026年11月6日 · Orelon Team 著

AI動画テンプレートを見る

着想のためにコミュニティ作品をいくつか閲覧し、任意のテンプレートを開いて Orelon で作成を続けましょう。

Learn how to write prompts that produce cinematic AI video: shot structure, camera language, lighting, iteration loops, and a repeatable review process.

Prompt-based video generation has moved past the demo-reel stage. You type a sentence, wait a couple of minutes, and a clip comes back with believable motion, consistent light, and a camera that seems to know where it is standing. The gap between "a machine made this" and "someone designed this" is now mostly a writing problem: output quality tracks the precision of the instruction. This guide is about that instruction — how to write prompts that survive the render, how to iterate without burning an afternoon, and how to build a workflow that produces a coherent sequence instead of a folder of lucky accidents.

What a prompt-based video generator is actually doing

A text-to-video model does not read your sentence the way a colleague would. It converts your words into a compressed numerical description, then generates frames that are statistically consistent with that description and with each other. The hard part is not the first frame; it is keeping frame forty plausible given frame one. Modern systems solve this with temporal attention and latent interpolation, which is why a well-worded prompt produces motion that feels physical rather than shuffled.

The prompt is a constraint set, not a wish

Treat every phrase as a constraint the model must satisfy. "A woman walking through a rainy market" constrains subject, action, weather, and setting. It says nothing about lens, pace, or mood, so the model fills those gaps with whatever is most common in its training data — usually a generic wide shot with flat light. Adding constraints narrows the distribution of possible outputs until what comes back resembles what you pictured.

What the model still decides for you

Even a dense prompt leaves room: exact framing, minor set dressing, the rhythm of a gesture. That is not a flaw. It is the collaborator's contribution, and the reason two runs of the same prompt differ. Your job is to control the variables that matter to the story and let the rest be a pleasant surprise. If a detail is non-negotiable, anchor it with a reference image rather than more adjectives.

The anatomy of a prompt that survives the render

A reliable prompt reads like a shot description written by a cinematographer: concrete nouns first, camera and light second, style last. Order matters less than completeness, but grouping related ideas helps you debug which phrase caused a problem.

Subject and action, stated once

Name the subject plainly and give it one clear action. "A cyclist" plus "coasting down a wet cobblestone street" works. "A mysterious traveler with an unknowable past who might be a courier or maybe a student" does not. Multiple subjects are fine if you specify their relationship: "a cyclist in a yellow rain jacket, a tram passing behind her in soft focus." Vague adjectives that describe backstory rather than appearance tend to be ignored entirely.

Setting gives the model something to occlude

Depth cues come from objects in front of and behind your subject. "A narrow market alley with hanging tarps in the foreground and a lit doorway at the far end" gives the renderer layers to work with. Empty rooms and blank skies flatten into something that looks like a screensaver, because there is nothing to parallax against when the camera moves.

Style words that do real work

"Cinematic" on its own is close to meaningless. Terms tied to a visible technique carry weight: shallow depth of field, anamorphic flare, high-contrast window light, muted teal and ochre palette, 35mm grain, documentary handheld. Choose two or three that reinforce each other instead of stacking ten that fight. A palette and a lighting condition are almost always worth naming.

Negative constraints, used sparingly

Most modern tools accept an exclusion field or respond to "no on-screen text." Use it for the failures you have actually seen: warped hands, duplicated limbs, floating objects, watermarks, captions. Listing fifteen exclusions tends to dilute the prompt and can introduce the very artifact you are trying to avoid — models are not reliable at negating a concept that dominates the wording.

Camera and light as control levers

If you change only one thing between runs, change the camera. It is the single largest source of perceived quality and the easiest element to describe precisely.

Framing vocabulary

Use standard terms: extreme wide, wide, medium, medium close-up, close-up, macro. Add subject placement when it matters — "subject left of frame, negative space right" — because the model will otherwise center everything. A close-up of hands on a keyboard reads differently from a wide of a person at a desk, and naming the shot prevents the model from defaulting to the safest mid-shot.

Movement vocabulary

Distinguish between camera movement and subject movement. "Slow dolly in" is camera. "She turns toward the window" is subject. Combining them without clarity produces a clip where both drift. Useful moves include slow push in, pull back, lateral tracking, orbit, crane up, handheld follow, and locked-off tripod. Add pacing words — slow, steady, accelerating — because speed is otherwise arbitrary. Fast moves are where morphing artifacts live; if a shot must whip, keep it under two seconds.

Lighting as a palette

Describe the source and the direction. "Warm practical lamps from the left, cool window light from behind" gives a renderer two competing temperatures and a reason for shadow. Time-of-day language is efficient: blue hour, overcast noon, harsh midday sun, sodium streetlight. If you want a specific mood, name the contrast ratio instead of the emotion — "deep shadows, single soft key, rim light on the shoulder" is actionable in a way that "melancholy" is not.

Multimodal prompting: when text is not enough

Words are a lossy format for visual ideas. When precision matters, supply an image. First-frame anchoring — giving the model a still to start from — locks composition, palette, and character design in one step, and it is the most reliable way to keep a subject recognizable across shots.

You can generate that still in the same session using an AI image generator, refine it until the framing is exactly right, then animate it. Beyond the first frame, reference images can carry style (a color grade you like) or motion (a clip whose camera move you want echoed). Not every tool exposes both, so check what your generator accepts before building a workflow around it.

Audio is the other underrated input. Even when a tool does not generate sound, writing the intended rhythm into the prompt — "cuts on the beat," "a held breath before the reveal" — influences pacing decisions that would otherwise default to neutral.

A repeatable iteration loop that saves hours

Random re-rolling is the most common time sink in AI video. Replace it with a fixed loop.

  1. Baseline. Write the full prompt, render once, and judge it honestly against the shot's purpose rather than against your imagination.
  2. Isolate one variable. If the light is wrong, change only the light phrase. Changing three things at once teaches you nothing about which one worked.
  3. Lock what works. Once a composition lands, save the prompt text and the seed if the tool exposes one. Reuse exact phrasing for related shots.
  4. Extend rather than regenerate. If the first two seconds are perfect and the rest drifts, extend from the good segment instead of re-rolling the whole clip.
  5. Finish outside the model. Grain, grade, stabilisation, and sound design belong in an editor. Fixing texture in the prompt is usually slower than fixing it in post.

Keep a running document of prompts that produced usable frames. Over a few projects it becomes more valuable than any generic tip list — and browsing a prompt library alongside your own notes is a fast way to steal structure without copying content.

From shot list to sequence: a worked example

Imagine a thirty-second product film for a fictional coffee roaster. Six shots: beans falling, a hand scooping, steam rising, a pour, a cup on a windowsill, a logo card. Writing six independent prompts invites six different visual worlds, so the sequence needs shared anchors: one lens family, one palette, one light direction, one grain level.

The shared block might read: "warm morning window light from camera left, muted brown and cream palette, shallow depth of field, 50mm feel, fine grain." Each shot then adds only its own subject and camera. Shot three becomes: "medium close-up of steam rising from a ceramic cup, slow push in, warm morning window light from camera left, muted brown and cream palette, shallow depth of field, 50mm feel, fine grain."

A continuity checklist before you render

Check five things across every shot: light direction, palette, lens feel, motion speed, and subject wardrobe. If any of those changes without narrative reason, the cut will feel like a montage of stock footage rather than a film. Reusing a video template as the structural spine helps here, because it enforces consistent durations and transitions while you focus on the images.

Handling the hero shot

Spend your iteration budget unevenly. The opening frame and the final product moment carry most of the perceived quality; middle shots can be simpler. Lock the hero shot first, then match everything else to it — not the other way around.

Common failure modes and how to fix them

Subject morphing mid-clip. Usually caused by an ambiguous subject description or an overly fast camera move. Shorten the clip, simplify the action, and add an explicit framing term.

Style drift across shots. You changed a style phrase between prompts. Keep a canonical style block in a text file and paste it verbatim.

Mushy detail and plastic skin. Often a symptom of too many texture adjectives competing. Pick one — "natural skin texture" or "documentary realism" — and drop the rest.

Crowded frames that collapse. Reduce the number of described objects. Three named elements per shot is a practical ceiling for short clips.

Garbled on-screen text. Do not ask a video model to render typography. Generate clean plates and add titles in an editor.

Unwanted slow motion. Many models default to a languid pace. Specify speed directly: "at natural walking speed," "brisk, real-time movement."

Rights, review, and where this fits in production

Prompt-based generation is strongest in previsualisation, social-first content, explainer b-roll, and rapid concept testing. It is weakest where a shot must match a physical product exactly, where a named person appears, or where legal review requires documented provenance. Know which bucket your project falls into before you write a single prompt.

On rights: avoid prompting for living artists by name, franchise characters, or logos you do not own. Keep a record of prompts and reference images alongside the final clips — many teams now require that trail for client approval. If synthetic footage appears in a public campaign, a short disclosure is increasingly standard and rarely costs anything.

On review: watch every clip at full speed and at half speed before it enters a timeline. Artifacts hide in the blur of a fast playback and surface dramatically on a large screen. Build a five-minute QC pass into the schedule rather than discovering problems in the final assembly.

FAQ

Do longer prompts always produce better video? No. Longer prompts help up to the point where constraints start competing. If two phrases could be read as contradictory, the model averages them into something vague. Aim for one clear subject, one action, one camera instruction, one lighting condition, and a short style block.

How many renders should a single shot take? For social content, three to five focused attempts is normal. If you are past eight and still missing, the prompt is usually wrong rather than unlucky — rewrite the camera line or simplify the action instead of re-rolling.

Can I keep a character consistent across multiple clips? Yes, with effort. Generate a strong character still, reuse it as the first frame for each shot, and repeat the exact same descriptive phrasing every time. Vague terms like "a woman in her thirties" will produce a different woman each run.

What is the best aspect ratio to start with? Storyboard in the ratio you will publish. Vertical compositions break when you crop a wide render, and the model frames subjects differently when the canvas is tall. Decide before you write the prompt.

Do I still need an editor? Always. Generated clips are raw material: they need trimming, grading, sound, and rhythm. Teams that skip post-production produce work that looks generated; teams that finish properly produce work that looks directed.

Bring your idea to motion with Orelon

Orelon is built for cinematic ideas in motion: describe the shot, anchor it with a reference frame, and iterate until the sequence holds together. Start with the AI video generator, borrow structure from the prompt library, and keep your style block in a text file so every shot in the film speaks the same visual language. Then open the Orelon homepage to see what a finished sequence looks like — and write your first prompt today.