Orelon logoOrelon
料金

Online Video Editor and Converter Workflow for AI Footage

2026年11月8日 · Orelon Team 著

AI動画テンプレートを見る

着想のためにコミュニティ作品をいくつか閲覧し、任意のテンプレートを開いて Orelon で作成を続けましょう。

Build a repeatable pipeline for AI-generated video: delivery specs, codec choices, conversion order, vertical reframing, and export checks that hold up.

Most AI video projects do not fall apart at the generation step. They fall apart in the handoff — the messy stretch between a folder of promising clips and a file a platform will accept without grinding it into mush. An online editor and converter closes that gap faster than any other tool, but only if you treat it as one station in a pipeline rather than a magic button that fixes everything.

What follows is a working system: how to set delivery targets before you generate anything, what browser-based tools genuinely do well, where they quietly damage your footage, and how to run a five-stage pipeline that survives real deadlines. The same logic applies whether you are producing shots with an AI video generator or shooting on a phone in your kitchen.

Set the delivery spec before you touch a single clip

The biggest time sink in AI video work is re-exporting. You cut a beautiful 16:9 piece, then learn the client wants vertical, then learn the platform caps file size, then learn the audio is too hot. Each discovery costs a full render cycle and a chunk of your afternoon.

Reverse the order. Write the delivery spec before generation and keep it open in a side window while you edit.

The six numbers that decide everything

  • Aspect ratio and safe zones. 16:9 for landscape embeds and long-form, 9:16 for short-form, 1:1 or 4:5 for feeds. If a vertical cut is coming later, compose with extra headroom and keep the subject inside the center third of the frame.
  • Duration ceiling. Many short-form surfaces reward 15–45 seconds. Knowing the ceiling changes how many shots you generate and how long each one should be.
  • Frame rate. 24 fps reads filmic, 25 or 30 suits screen content and broadcast, 50 or 60 gives you slow-motion room. Pick one and conform everything to it.
  • Loudness. Around −14 LUFS integrated is a safe web target; broadcast has its own standards. Loudness is the single most common reason a technically clean export still sounds amateur.
  • Bitrate and container. MP4 with H.264 video and AAC audio is the universal answer. Higher bitrate for masters, lower for uploads.
  • Captions. Burned in or delivered as a sidecar file? Burned-in captions are permanent and cannot be edited, translated, or corrected later. Decide deliberately, not by default.

Write those six lines into a plain text file called delivery-spec.txt and drop it into the project folder. It sounds trivial. It deletes an entire category of rework.

A spec sheet you can reuse

Once you have written one spec, you have written a template. Keep two or three: web-16x9, social-9x16, client-broadcast. Copy the relevant one into a new project folder on day one and adjust only what changed. Teams that do this stop re-litigating the same export settings every week.

What browser-based editors do well, and where they break

Online editors have improved dramatically, but they are not small versions of a desktop editing suite. They are different instruments. Use them for what they are good at and stop expecting them to be something else.

Tasks worth handing to the browser

  1. Transcoding. Turning a generated WebM or MOV into a clean MP4 that every platform accepts without complaint.
  2. Compression to a hard limit. Hitting a 100 MB or 250 MB upload cap without visible artifacting.
  3. Simple assembly. Trim, reorder, join, add a title card, drop in a music bed, export.
  4. Caption generation. Fast and good enough for social, occasionally wrong on names, brands, and technical jargon.
  5. Audio extraction and replacement. Pulling a clean track or swapping a scratch voiceover for the real one.
  6. Utility conversions. A GIF from a short clip, still frames from a video, an audio-only export for a podcast feed.

Where browser tools start to hurt

  • Frame-accurate cutting. Web timelines often snap to keyframes or scrub coarsely. If a cut must land on a specific frame of motion, a desktop editor is more predictable.
  • Large files. A two-minute 4K master can run several hundred megabytes. Uploading it repeatedly is slower than local processing.
  • Color management. Many browser tools work in a simplified color space. If your generated clips have different white balance or contrast, grading them in a browser is guesswork dressed up as intent.
  • Multi-track audio. Ducking, EQ, and layered sound design are usually shallow or missing entirely.
  • Retention and privacy. Understand what happens to uploaded material before you send unreleased product footage anywhere. For client work, local processing or a clearly documented policy is the safer path.
  • Offline work. Planes, trains, and hotel Wi-Fi still exist.

The practical answer is a hybrid: browser tools for conversion, compression, and quick assemblies; a desktop editor for finishing, sound, and color.

Decision criteria in three questions

Ask these before opening any tool: Does this task require frame accuracy? Is the file larger than roughly 500 MB? Does it involve layered audio or color matching across clips? Two or more yes answers means desktop. Zero means the browser is faster and you should not feel guilty about it.

A five-stage pipeline that keeps AI footage under control

This is the backbone. It works for a 15-second ad and for a five-minute explainer.

Stage 1: Ingest and triage

Generate more than you need, then throw most of it away. Watch every clip once at speed and sort into three folders: keep, maybe, no. Do not rename yet. Do not trim yet. Just decide, fast, before affection for a shot sets in.

While triaging, apply a naming convention:

project_shot03_take2_v1.mp4

Project, shot number, take, version. It is boring, and it saves hours when you have forty clips and three of them look nearly identical.

Stage 2: Normalize before you cut

Before any creative editing, conform everything to one technical baseline: same resolution and pixel aspect ratio, same frame rate, same color space and gamma, same audio sample rate (48 kHz is standard).

Mixed frame rates are the most visible offender. A 24 fps generated clip next to a 30 fps screen recording produces judder on any horizontal movement, and no amount of editing hides it. Normalize once, at the start, in a batch conversion, then forget about it.

Stage 3: Assemble for rhythm, not completeness

AI footage is seductive: every clip looks impressive for its entire length. Resist that. A shot earns its runtime by changing something — information, emotion, location, energy.

A few working rules:

  • Cut on motion. Trim slightly before the movement completes so the cut feels intentional rather than late.
  • Vary shot length. A run of identical-length cuts feels mechanical. Two beats, then five, then one.
  • Use J-cuts and L-cuts. Let audio lead or trail the picture by a few frames; assembled AI shots then feel continuous rather than stitched.
  • Hold the establishing shot. One wide shot held for three seconds buys permission for six fast cuts afterward.

Stage 4: Export one master, derive every deliverable

This is where quality quietly dies. Every re-encode degrades the image, and stacking three of them produces the soft, blocky look people blame on the AI model.

The rule: export one high-quality master, then derive every deliverable from that master. Master in high-bitrate H.264 or a mezzanine codec, full resolution, captions unburned. Deliverable A is the compressed upload. Deliverable B is the vertical crop, taken from the master and not from Deliverable A. Deliverable C is the short teaser, also from the master.

Stage 5: Deliver, verify, archive

Watch the final file on the device your audience actually uses. A cut that reads beautifully on a 27-inch monitor can be unreadable on a phone in daylight. Then archive the folder: master, spec sheet, prompt log, final export. Future-you will want the prompt log more than the export.

Codec and container choices without the jargon

You do not need encoding theory. You need four safe defaults.

Situation Container Video codec Note
Universal delivery MP4 H.264 Plays everywhere, pairs with AAC audio
High-quality master MP4 or MOV H.264, high bitrate Keep captions and full audio unburned
Small web embed MP4 H.264, lower bitrate Watch for banding in gradients
Transparent overlay WebM or MOV VP9 or ProRes 4444 Verify browser support before relying on it

Two practical notes. H.265 offers better quality per megabyte but has patchier support in browsers and older devices — excellent for archival, risky for delivery. And if your footage has heavy grain, fog, or smooth gradients, raise the bitrate rather than the resolution; grain and gradients are what encoders sacrifice first.

Bitrate beats resolution more often than people expect

A 1080p export at a generous bitrate usually looks better on a phone than a 4K export squeezed to fit an upload cap. Resolution is a headline; bitrate is the actual information. When a platform re-compresses your file, it rewards a clean source with headroom, not a bigger frame.

A worked example: a 45-second product teaser from six shots

Setup. A client wants a 45-second teaser for a landing page plus a vertical cut for social. Spec: 16:9 at 24 fps, 9:16 crop later, −14 LUFS, MP4 H.264, under 150 MB each.

Generation. Twelve clips requested, six kept: two hero shots of the product, two detail inserts, one environment wide, one hand-interaction close-up. Prompts and seeds logged in a spreadsheet as they are generated, not afterward.

Normalize. All six conformed to 1920×1080, 24 fps, one color profile. Roughly eight minutes in a converter.

Edit. Structure: three-second environment wide, two-second hero, four quick detail cuts at about a second each, a three-second hold on the hand close-up, four-second end card. Picture runs 38 seconds, leaving seven seconds for a logo animation and a beat of silence.

Sound. Music bed ducked 6 dB under the voiceover. A soft whoosh placed two frames before each detail cut. Loudness normalized at export, not by ear.

Export. One master, two deliverables derived from it. The vertical version was reframed by hand for the hero shot because auto-crop sliced the product in half.

Total elapsed time: about three hours, most of it in selection and sound. The conversion steps took under twenty minutes.

The documentation habit: prompt logs and shot sheets

AI footage creates a problem camera footage does not: there is no metadata telling you why a clip exists. Fix it with a log sheet, one row per generated clip: filename, verbatim prompt, seed or reference ID if the tool exposes one, requested duration and aspect ratio, camera move, verdict, and a note about what it is good for.

That last column is the valuable one. "Good for a transition." "Too fast for the opening." "Subject drifts left — usable as a cutaway." Six weeks later, this log is the difference between reusing footage and regenerating it from scratch.

A curated prompt library helps here too, because reusing proven prompt structures produces more consistent clips, which makes the whole pipeline more predictable.

Reframing for vertical without losing the subject

Auto-crop is the most reliable way to embarrass yourself. It centers on motion, not on meaning, and it will happily cut a product in half to keep a background tree in frame.

Work shot by shot instead. For hero shots, reframe manually with keyframes. For detail inserts, a static crop usually works. For wide establishing shots, either accept a tighter crop or generate a vertical version deliberately. The cheapest fix is upstream: when you know a vertical deliverable is coming, generate at least the hero shots in vertical composition from the start.

Also check safe zones. Platform interfaces eat the bottom fifth of a vertical frame and the top strip. Captions placed at the very bottom of the export will be covered by buttons on the device where most viewers watch.

Audio: the half of the video people skip

Three moves cover most of it. First, normalize loudness at export to a known target instead of trusting your ears across headphones, laptop speakers, and a phone. Second, duck the music under any voice — 4 to 6 dB is usually enough and reads as professional. Third, place one or two small sound effects at structural moments: a transition, a reveal, a title card. Restraint here does more than a dense sound design pass nobody finishes.

If a clip has unusable generated audio, replace it rather than repair it. Extracting the track, muting, and dropping in a clean music bed takes two minutes and instantly raises perceived quality.

Seven mistakes that cost a full re-render

Re-encoding in a chain. Export, compress, then compress again for a different platform. Derive everything from the master.

Auto-cropping for vertical. Check every shot by hand, or generate vertical from the start.

Ignoring loudness. The video sounds faint on one platform and clipped on another. Normalize at export to a fixed target.

Burned-in captions on a master. The master becomes unusable for other languages or a corrected name. Keep captions as a separate layer until the final deliverable.

Filename chaos. final_final_v3.mp4. Version numbers only move forward, and the master is never overwritten.

Over-cutting. Every AI clip is trimmed to its shortest usable moment and the result feels frantic. Let one or two shots breathe.

No phone screening. Nobody watched the export before it went live. Two minutes with sound on prevents most embarrassment.

Quality checks before you press export

Run this list every time. It takes four minutes.

  1. Play the timeline once, uninterrupted, at normal speed.
  2. Re-watch the first two seconds and the last two seconds — the most-viewed moments.
  3. Mute the audio and watch again; the story should still read.
  4. Listen on phone speakers, not studio headphones.
  5. Confirm frame rate and resolution match the spec sheet.
  6. Confirm file size sits under the platform limit.
  7. Confirm captions are legible at mobile size and clear of interface overlays.
  8. Confirm the filename matches the agreed convention.

FAQ

Do I need a desktop editor, or is a browser tool enough?

For a single short clip with simple cuts, a browser tool is plenty. Once you need frame-accurate cuts, layered audio, or consistent color across many clips, a desktop editor pays for itself within the first project.

Why does my AI footage look softer after export?

Almost always repeated compression. Export one high-bitrate master and derive deliverables from it. If banding appears in gradients or fog, raise the bitrate rather than the resolution.

What is the safest format for social platforms?

MP4 with H.264 video and AAC audio, at the platform's recommended resolution, with loudness normalized around −14 LUFS integrated. That combination is accepted everywhere and survives platform re-processing reasonably well.

How many generated clips should I plan per finished second?

A workable ratio is three to four generated clips for every clip that reaches the final cut, with roughly one cut every 1.5 to 3 seconds in short-form. A 45-second piece usually needs six to twelve usable shots.

Can I convert horizontal footage to vertical without ruining the framing?

Sometimes, but never automatically. Reframe hero shots manually, and generate future footage in vertical composition when you already know the deliverable is vertical.

How do I keep a sequence looking consistent?

Lock the look before generating the bulk of your shots: same lens language, same lighting description, same palette in the prompt. Then normalize technically in the converter and grade lightly at the end. Consistency is a pre-production decision far more than a post-production fix.

Where do templates fit?

Templates are best for structure, not for final looks — section lengths, caption placement, end-card timing. Starting from a video template saves assembly time while leaving the creative calls to you.

What should I archive besides the final file?

The master export, the spec sheet, the prompt log, and one representative still frame per setup. If a client asks for a recut six months later, that archive is the difference between a quick afternoon and a full rebuild.

Bring the workflow into Orelon

A clean pipeline is not about owning the most tools. It is about knowing which station each task belongs to: generate in one place, normalize in another, finish somewhere with real control, and deliver from a single master.

Orelon is built for the first station — turning a written idea into cinematic footage you can actually cut. Start with the AI video generator to produce your first batch of shots, log the prompts that worked, then run them through the five-stage pipeline above. If you want to see how other creators structure sequences, exports, and reframes, the Orelon blog has more breakdowns to borrow from.